Configuring Wpa And Wpa2 With Radius - NETGEAR WNDAP350 Reference Manual


To configure WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from
the left panel, and then select RADIUS Server Settings. The RADIUS Server Settings
screen displays.
2. Enter the RADIUS settings as shown in
page 38.
3. Click Apply to save your RADIUS settings.
4. Under the Configuration tab, select Security from the main menu, and then select either
Security Profile Settings for 802.11b/bg/ng or 802.11a/n.a The screen for the Profile Settings
you selected displays. When the Security Profile screen displays, check the check bb ox of
the Security Profile you want to modify and click Edit.
5. From the Network Authentication drop-down menu, select WPA2 with RADIUS from the list.
By default, Data Encryption will be set to AES.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.

Configuring WPA and WPA2 with RADIUS

Not all wireless adapters support WPA and WPA2. Make sure your client card supports
WPA2. The wireless adapter hardware and driver must also support WPA2.
Consult the product documentation for your wireless adapter; WPA client software for
instructions on configuring WPA settings and WPA2 client software for instructions on
configuring WPA2 settings.
Figure 22. Configure WPA and WPA2 with RADIUS
ProSAFE Dual Band Wireless N Access Point WNDAP350
Basic Installation and Configuration
Configuring the RADIUS Server Settings
44
on