Configuring Wpa-Psk - NETGEAR WNDAP350 Reference Manual


To configure WPA and WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from
the left panel, and then select RADIUS Server Settings. The RADIUS Server Settings
screen displays.
2. Enter the RADIUS settings as shown in
page 38.
3. Click Apply to save your RADIUS settings
4. Under the Configuration tab, select Security from the main menu, and then select either
Security Profile Settings for 802.11b/bg/ng or 802.11a/na. The screen for the Profile Settings
you selected displays. When the Security Profile screen displays, check the check box of the
Security Profile you want to modify and click Edit.
5. From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS
from the list. By default, Data Encryption will be set to TKIP+AES.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.

Configuring WPA-PSK

Not all wireless adapters support WPA. The wireless adapter hardware and driver must also
support WPA. Consult the product document for your wireless adapter and WPA client
software for instructions on configuring WPA settings.
Figure 23. Configure WPA-PSK

To configure WPA-PSK:
1. From the Network Authentication drop-down menu, select WPA-PSK. By default, Data
Encryption will be set to TKIP.
ProSAFE Dual Band Wireless N Access Point WNDAP350
Basic Installation and Configuration
Configuring the RADIUS Server Settings
45
on