Rear Panel - NETGEAR WNDAP350 Reference Manual

ProSAFE Dual Band Wireless N Access Point WNDAP350
Table 1. Front Panel LED Indicators (continued)
Item LED
4 802.11na WLAN
Off
Blink
(Green)
5 802.11ng WLAN
Off
Blink
(Green)

Rear Panel

1
2
Figure 2.
The WNDAP350 rear panel functions are described below:
1. Left and Right Detachable Antennas. The WNDAP350 provides two detachable dipole
antennas.
2. Power Socket. This socket connects to the WNDAP350 12V 1.2A power adapter.
3. RJ-45 Ethernet Port. Use the WNDAP350 Ethernet RJ-45 port to connect to an Ethernet
LAN through a device such as a hub, switch, router, or PoE switch.
4. Serial Console Port. Male DB-9 serial port for serial DTE connections.
5. Restore to Factory Defaults Button. The restore to default button restores the
WNDAP350 to the factory default settings.
DESCRIPTION
Wireless LAN Link Activity Indicator (5 GHz)
Indicates WLAN 802.11n/a (5GHz) mode is disabled.
Indicates Wireless data traffic in 5GHz modes.
Wireless LAN Link Activity Indicator (5 GHz)
Indicates WLAN 802.11b/g (5GHz) mode is disabled.
Indicates Wireless data traffic in 2.4GHz modes.
3
Introduction
13
5
4 1