NETGEAR WNDAP350 Reference Manual page 48


To restrict access based on MAC addresses:
1. Log in to the WNDAP350 using the default address of http://192.168.1.1, user name of
admin and default password of password, or whatever LAN address and password you
have set up.
2. Under the Configuration tab, select Security on the main menu, select Advanced from the
left panel, and then select MAC Authentication. The MAC Authentication screen displays.
Figure 26. Configure MAC authentication
3. Check the Turn Access Control On radio box to enable Access Control feature.
4. Select the desired Access Control Database options. The options are:
• Local MAC Address Database. The Access Point will use the local MAC address
table for Access Control. This is the default.
• RADIUS MAC Address Database. The Access Point will use the MAC address table
located on the external RADIUS server on the LAN for Access Control. If you choose
this database, you must configure the RADIUS Server Settings first (see
the RADIUS Server Settings
5. The Trusted Wireless Stations list shows any wireless stations you have entered. If you
have not entered any wireless stations this list will be empty. To delete an existing entry,
select it and then click Delete.
6. Click Refresh to refresh the Available Wireless Stations list found in your area.
7. Select the stations from the list of Available Wireless Stations found in your area, or enter
the MAC address of a station to add a new station manually. (You can usually find the MAC
address printed on the bottom of the wireless adapter.)
8. Click Add to add the wireless device to the Trusted Wireless Stations list. Repeat these
steps for each additional device you want to add to the list.
9. Click Apply to save your wireless access control list settings.
Now, only devices on this list will be allowed to wirelessly connect to the WNDAP350.
ProSAFE Dual Band Wireless N Access Point WNDAP350
on page 38).
Basic Installation and Configuration
48
Configuring