NETGEAR WNDAP350 Reference Manual page 20

ProSAFE Dual Band Wireless N Access Point WNDAP350
outbound traffic to be tagged with this VLAN ID. However, if their VLAN ID is same as
the Untagged VLAN ID, then the outbound traffic is not tagged. There can be only one
Management VLAN. The default is 1.
8. Select Time from the left panel. The Time screen displays, as shown in
and system time related
Figure 6. Time zone and system time related settings
9. Enter the Time Settings for your area. See the online help or
page 21 for more information about how to configure the settings on this screen.
10. Select IP on the main menu. The IP Settings screen displays, as shown in
Settings.
Figure 7. IP Settings
settings.
Basic Installation and Configuration
20
Figure 6, Time zone
Configuring Time Settings
Figure 7, IP
on