Hardware Description; Front Panel - NETGEAR WNDAP350 Reference Manual

Hardware Description

This section describes the front and rear hardware functions of the WNDAP350.

Front Panel

The WNDAP350 front hardware functions are described below.
1
Figure 1.
The following table explains the LED indicators:
Table 1. Front Panel LED Indicators
Item LED
1 PWR/TEST
Off
On
Blink
2 100
Off
Yellow
Green
3 LINK/ACT LAN
Off
Blink
(Green)
ProSAFE Dual Band Wireless N Access Point WNDAP350
2 3
DESCRIPTION
Power Indicator
No power.
Power is on.
Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
Ethernet LAN Speed Indicator
Indicates 10 Mbps or no link detected.
Indicates 100 Mbps link detected.
Indicates 1000 Mbps link detected.
Ethernet LAN Link Activity Indicator
Indicates no Ethernet link detected.
Indicates data traffic on the 1000Mbps Ethernet LAN.
Introduction
4
5
12