Table of Contents
Advertisement
Table 1. LED descriptions (Continued)
LED
Description
Ethernet ports
The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100
1-4
Mbps or 10 Mbps Ethernet connections.
•
Solid. A powered-on device is connected to the Ethernet port.
•
Blinking. The port is sending or receiving traffic.
•
Off. No device is connected to this Ethernet port.
WiFi On/Off
Pressing and holding this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on
button with LED
and off. If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off
and you cannot use WiFi to connect to the router.
WPS button with
This button lets you use WPS to join the WiFi network without typing the WiFi password (see
LED
Join Your WiFi Network
white.
Rear Panel
The rear panel has the connections and buttons shown in the following figure.
Reset
button
LAN ports 1–4
Figure 3. Router rear panel
The Reset button restores the factory settings. See
R7000 Smart WiFi Router
). The WPS LED blinks white during this process and then lights solid
Ethernet
Internet
port
10
USB 3.0
Power
port
On/Off
connector
Factory Settings
Power
on page 127.
Advertisement
Table of Contents
