Draytek vigor2960 series User Manual page 77

Available parameters are listed as follows:
Item
Username
Password
MTU/MRU
Service Name
Debug
Always On
Fixed IP
Connection
Detection Mode
Connection
Detection Host
Vigor2960 Series User's Guide
Description
Type the user name offered by your ISP.
Type the password offered by your ISP.
Type the value of MTU/MRU. The default value is 1492.
This is an optional setting. Some ISP will offer such
information and ask you to type the same data on this field.
Click Enable to display the PPPoE debug message in
Syslog. The default setting is Disable.
Enable – Click it to enable the function of Always On. The
router will keep network connection all the time.
Disable – Click it to disable the function of Always On.
Enable – Click it to enable the function of Always On. The
router will keep network connection all the time.
Disable – Click it to disable the function of Always On.
Fixed IP Address – Type an IP address here if you choose
Enable for Fixed IP.
Select a detecting mode for this WAN interface. There are
two ways PING and HTTP supported in Vigor router for
you to choose to send the request out.
If you choose PING/HTTP as Connection Detection Mode,
you have to specify the detection host address in this field.
Use the default setting.
69