Available parameters are listed as follows:
Item
Authenticate Protocol
User Authentication
Type
LDAP profiles
DHCP from
DHCP Relay
DHCP Server Location
Description
The router will authenticate the dial-in user with the
protocol selected here.
PAP - It means the router will attempt to authenticate
dial-in users with the PAP protocol.
CHAP - It means the router will attempt to authenticate
dial-in users with the CHAP protocol.
Set user authentication to Local server or RADIUS server.
Choose a LDAP profile for L2TP Server if LDAP is
selected as user authentication type.
To clear the selected one, click
object selections.
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
Enable - Let the router assign IP address to every host in
the LAN.
Disable - Let you manually assign IP address to every host
in the LAN.
It is available when DHCP Relay is enabled.
316
to remove current
Vigor2960 Series User's Guide