Draytek vigor2960 series User Manual page 103

DNS Redirection
IPv6 Protocol
IPv6 Address
IPv6 Prefix Length
DHCPv6 SLA
WAN Interface
DHCPv6 SLA ID
Apply
Cancel
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
Vigor2960 Series User's Guide
Add – Click it to add a new subnet mask with IP address and
specified mode.
Save – Click it to save the settings.
IP – Type the IP address if you click Add for adding a new
entry.
Subnet Mask – Use the drop down list to choose the one you
want.
Mode – Specify NAT or Routing as the mode.
DHCP – Click Enable to activate the DHCP function on such
subnet. When it is enabled, you have to specify the IP range
to be assigned by the DHCP server for such subnet.
Start IP – Type an IP address as a starting point.
End IP – Type an IP address as an ending point.
Enable – It can redirect DNS queries from such LAN profile
to router's DNS Server. It must work with LAN DNS
function.
It defines the IPv6 connection types for LAN interface.
Possible types contain Link-Local, Static and DHCP-SLA.
Except Link-Local, each type requires different parameter
settings.
Link-Local- Link-Local address is used for communicating
with neighbouring nodes on the same link. It is defined by the
address prefix fe80::/10. You don't need to setup Link-Local
address manually for it is generated automatically according
to your MAC Address.
Static –This type allows you to setup static IPv6 address for
LAN.
DHCP-SLA- DHCPv6 client mode would use IA_NA option
of DHCPv6 protocol to obtain IPv6 address from server.
If Static is chosen as IPv6 Protocol, please type the IPv6
address in this field.
Display the IPv6 prefix length.
If DHCP-SLA is chosen as IPv6 Protocol, please choose one
of the WAN profiles in this field.
The ID number set here is used by an individual organization
to create its own local addressing hierarchy and to identify
subnets.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
95