Draytek vigor2960 series User Manual page 399

4 . 1 4 . 3 .
4 . 1 4 . 3 .
Available settings are explained as follows:
Item
Enable Temperature
Sensor
Display Unit
Temperature Alert Lower
limit / Temperature Alert
Upper limit
Calibration
Temperature Alert Time
Interval
Apply
Cancel
Vigor2960 Series User's Guide
2 G e n e r a l S e t u p
2 G e n e r a l S e t u p
Description
Check this box to enable such function.
Choose Celsius or Fahrenheit as the display unit.
Type the upper limit and lower limit for the system to
send out temperature alert.
Type a value used for correcting the temperature error.
The default setting is one minute. That means, the
temperature alert will be sent per minute.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
391