General Setup - Draytek vigor2960 series User Manual

4 . 1 2 . 1 G e n e r a l S e
4 . 1 2 . 1 G e n e r a l S e
4 . 1 2 . 1 . 1 G e
4 . 1 2 . 1 . 1 G e
This page is used to configure settings which will be used by the clients to register to such
Vigor router.
Available parameters are listed as follows:
Item
Enable
WAN Profile
Port
Username
Password
Polling Status
Polling Interval
Apply
Cancel
t u p
t u p
n e r a l S e t u p
n e r a l S e t u p
Description
Check it to enable the settings.
Specify an interface for VPN management.
Type a port number for Vigor2960.
Type a username which will be used by any CPE tried to
connect to Vigor router.
Type a password which will be used by any CPE tried to
connect to Vigor router.
Enable – Click it to enable the polling function.
Disable – Click it to disable the polling function.
Type the time value (unit is second). The range is from 60 ~
86400.
Click it to save the configuration.
Click it to discard the settings configured in this page.
358
Vigor2960 Series User's Guide