Draytek vigor2960 series User Manual page 113

4 4 . . 2 2 . . 2 2 . . 2 2
Available parameters are listed as follows:
Item
PPPoE Server
PPPoE User Isolation
Deny Internet Access
Except PPPoE User
Access Concentrator
(AC) Name
Service Name
Primary DNS
Secondary DNS
PPPoE Server
Authentication Type
Vigor2960 Series User's Guide
G G e e n n e e r r a a l l S S e e t t t t i i n n g g
Description
Disable – Click it to disable this function.
Enable – Click it to enable the function of PPPoE server.
Disable – Click it to disable this function.
Enable – Click it to isolate the PPPoE users who access into
Internet via Vigor router.
Disable –Click it to disable this function.
Enable – If you click Enable, only the PPPoE user can
access into Internet.
Type the name which will be reported as the access
concentrator name.
Type a specific string for authentication.
It causes the named service to be advertised in a Service
Name tagged in the PADO ( PPPoE Active Discovery
Offer ) frame.
Type an IP address as primary DNS.
Type another IP address as secondary DNS.
Choose the authentication type for PPPoE server.
Any PPPoE user shall pass the authentication of PPPoE
105