Draytek vigor2960 series User Manual page 313

DPD Timeout
If you choose SSL as the Type, you will get the following screen:
Available parameters are listed as follows:
Item
Profile
Enable
Always On
Dial-Out Through
Failover to
Idle Timeout
Server IP/Host
Name
SSL User Name
SSL Password
Vigor2960 Series User's Guide
Hello message will be emitted periodically when a tunnel is
idle. Use the value 0 to disable this function. The
recommended value is 30 seconds if enabled.
It is the timeout timer. The peer will be declared dead once
no acknowledge message is received after timeout value.
Use the value 0 to disable this function. The recommended
value is 120 seconds if enabled.
Description
Display the name of the VPN profile.
Check this box to enable such profile.
Click Enable to make the profile being always on.
Choose a wan profile to be used by such profile. Then, use
the default WAN IP or specify a WAN Alias IP for VPN
tunnel.
Choose a wan profile which will lead the data passing
through other WAN automatically when the selected WAN
interface (in Dial-Out Through) is failover.
When Always On is disabled, you have to type the value for
terminating the network connection.
Type the IP address or host name of SSL VPN server.
Type a user name for authentication in SSL VPN connection.
Type a password for authentication in SSL VPN connection.
305