Draytek vigor2960 series User Manual page 326

4 . 9 . 4 . 3 S S L V P N
4 . 9 . 4 . 3 S S L V P N
This page display current status for VPN tunnel built with SSL protocol.
Available parameters are listed as follows:
Item
User Authentication
Type
LDAP profiles
DHCP from
DHCP Relay
DHCP Server Location
DHCP Server IP
Address
SSL VPN MSS
Apply
Cancel
Enter all of the settings and click Apply.
Description
Set user authentication to Local server or RADIUS server.
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
selections.
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host in
the LAN.
It is available when DHCP Relay is enabled.
Choose the WAN/LAN interface for the DHCP server.
It is available when DHCP Relay is enabled. Set the IP
address of the DHCP server you are going to use so the relay
agent can help to forward the DHCP request to the DHCP
server.
Type the maximum segment size (MSS) for SSL VPN tunnel.
Click it to save the configuration.
Click it to discard the settings configured in this page.
318
to remove current object
Vigor2960 Series User's Guide