Draytek vigor2960 series User Manual page 201

Item
Packet Inspection
Packets Number
Apply
Cancel
After finished the above settings, click Apply to save the configuration.
Vigor2960 Series User's Guide
Description
Firewall>>Filter Setup>>IP Filter/Application Filter.
Disable – No inspection will be performed.
Enable – Packet inspection will be performed.
If Packet Inspection is enabled, choose a packet number for
filtering. Available settings are from 4 to 16. For example,
"8" is selected as packet number setting. It means only the
former 8 packets will be filtered and inspected by Firewall
rule. Others are allowed to pass through without any
inspection.
Click it to save the configuration.
Click it to discard the settings configured in this page.
193