Draytek vigor2960 series User Manual page 187

Input Interface
Output Interface
Time Schedule
Service Protocol
Source IP
Destination IP
Apply
Cancel
9. Enter all of the settings and click Apply.
10. A new IPv6 filter rule has been added under the IPv6 Filter Group (named For_IPv61
in this case).
Vigor2960 Series User's Guide
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
Choose one of the LAN or WAN profiles as data receiving
interface.
Choose one of the LAN or WAN profiles as data
transmitting interface.
Time Object - Click the triangle icon
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
new time object profile.
Time Group - Click the triangle icon
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
new time group profile.
Service Type Object –Click the triangle icon
the profile selection box. Choose one or more service type
object profiles from the drop down list. The selected profile
will be treated as service type. You can click
another new service type object profile.
Service Type Group –Click the triangle icon
the profile selection box. Choose one or more service type
group profiles from the drop down list. The selected profile
will be treated as service type. You can click
another new service type group profile.
Source IPv6 Object - Click the triangle icon
the profile selection box. Choose one or more IP object
profiles from the drop down list. The selected profile will be
treated as source target. You can click
new IP object profile.
Destination IPv6 Object- Click the triangle icon
display the profile selection box. Choose one or more IP
object profiles from the drop down list. The selected profile
will be treated as destination target. You can click
create another new IP object profile.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
179
to display the
to create another
to display the
to create another
to display
to create
to display
to create
to display
to create another
to
to