Draytek vigor2960 series User Manual page 42

C o n f i g u r i n g V i g o r
C o n f i g u r i n g V i g o r
1. In Vigor2710, it is necessary to build two VPN connections (for two WANs) to connect
with Vigor2960. Please open the Web User Interfaceof Vigor2710 and open VPN and
Remote Access >> LAN to LAN.

First, please type the name of such VPN connection in the field of Profile Name
(e.g., 2960).

Check the box of Enable this profile.

Choose Dial-Out as Call Direction and check the box of Always on.
2. For Dial-Out Settings, please choose IPsec Tunnel and type WAN IP address of
Vigor2960 in the field of Server IP/Host Name for VPN (e.g., 1.169.162.1). Type the
same IKE Pre-Shared Key configured in Vigor2960.
2 7 1 0
2 7 1 0
34
Vigor2960 Series User's Guide