Draytek vigor2960 series User Manual page 165

Enable
Neighbor IP Address
Autonomous System
Number
H o w t o
H o w t o
1. Open Routing>> BGP Configuration and click the Neighbor tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item
Profile
Enable
Neighbor IP
Address
Autonomous
System number
Apply
Cancel
4. Enter all of the settings and click Apply.
5. A new profile has been added onto Neighbor table.
Vigor2960 Series User's Guide
Display the status of the profile. False means disabled; True
means enabled.
Display the IP address of the neighbor.
Display the autonomous system number of the neighbor in
BGP application.
a d d a n e w B G P p r
a d d a n e w B G P p r
Description
Type the name of the profile.
Check the box to enable this profile.
Type the private IP used for this profile.
Type the autonomous system number for the neighbor in
BGP application.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
o f i l e
o f i l e
157