Sony Betacam SX DNW-A100 Maintenance Manual page 303
Digital video hybrid recorder
Hide thumbs
Also See for Betacam SX DNW-A100:
- Maintenance manual (506 pages) ,
- Operation manual (134 pages) ,
- Brochure & specs (14 pages)
Table of Contents
Advertisement
(7) OXIDE C adjustment
Playback the 75% color-bar signal portion (0:00 to 3:00) of the alignment tape CR5-2A or CR5-2A
PS, and perform the adjustment.
(DNW-A100/A50/A45: CR5-2A, DNW-A100P/A50P/A45P: CR5-2A PS)
Adjustment point: 1RV407/DM-89(C-5)
C = 400 ± 40 mV p-p
Specification:
(8) Change the connection of the oscilloscope as follows:
CH-1:
TP3/DM-89(E-1), GND: E702/DM-89(D-1)
CH-2:
TP4/DM-89(E-1), GND: E702/DM-89(D-1)
(9) OXIDE Y adjustment
Playback the 75% color-bar signal portion (0:00 to 3:00) of the alignment tape CR5-2A or CR5-2A
PS, and perform the adjustment.
(DNW-A100/A50/A45: CR5-2A, DNW-A100P/A50P/A45P: CR5-2A PS)
Adjustment point: 1RV212/DM-89(G-6)
D = 400 ± 40 mV p-p
Specification:
(10) Eject the alignment tape CR5-2A/CR5-2A PS.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
C
D
6-4. DM-89 Board Replacement
6-65
Advertisement
Table of Contents
