Details Of Error Messages - Sony Betacam SX DNW-A100 Maintenance Manual

m
. Error codes 01 through 14 are detected in both/one of the SS-63 and/or MS-50 boards.
Error codes 20 through 23 are detected in the MS-50 board.
Error codes 92 through 99 are detected in the SS-63 board.
Error codes D1 through D8 are detected in the SSX board.
. There are three error groups of error codes: VTR, DISK and OTHERS. If errors occur in multiple error
groups, the error message of each group are switched at two-second intervals.
Also, if multiple errors occur in error group, the priority level of each group display are as follows:
VTR: 97, 02, 03, 04, 05, 07, 06, 01, 09, 08, 0A, 10, 11, 12, 13, 14, 20, 21, 22, 23
DISK: D8, D7, D6, D5, D4, D3, D2, D1
OTHERS: 92, 96, 98, 99

3-2. Details of Error Messages

c
The "protection mode" described in this section means the servo control system automatically stops the
tape transport and drum motor rotation, and maintains this state. The DNW cannot be automatically
recovered to the normal state when the DNW once enters the protection mode. Be sure to turn on the
power again under the absence of the cassette tape.
If the protection mode is entered with the cassette tape inserted, take out the cassette tape manually with
reference to "2-12. How to Take out the Cassette when the Tape is Slacking". Never turn on the power
again without taking out the cassette tape. This may damage the tape.
n
The messages on the time data display area differ from the messages which are superimposed on the
video monitor in some items. In this section, each message indicates as following example.
Ex. : ERROR-23 THREADING RING POSITION ERROR
(THRED RING SENS)
Message on time data display area
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
http://getMANUAL.com
Message superimposed on video monitor
3-1. Overview of Error Message
3-2. Details of Error Messages
3-3