Sony Betacam SX DNW-A100 Maintenance Manual page 204
Digital video hybrid recorder
Hide thumbs
Also See for Betacam SX DNW-A100:
- Maintenance manual (506 pages) ,
- Operation manual (134 pages) ,
- Brochure & specs (14 pages)
Table of Contents
Advertisement
4-2. TAPE Maintenance Mode (M0)
4-2-10. BETACAM PB ADJUST Mode (A3)
A3F : NV-RAM CONTROL
The A3F : NV-RAM CONTROL menu is used to save the
Betacam PB adjustment data adjusted in the BETACAM
PB ADJUST mode in NV-RAM.
The current adjustment data can return to the state before
adjustment when "ALL DATA PREVIOUS" is selected
before the adjustment data is recorded in the NV-RAM.
n
When the adjustment data was not stored in this menu, it
returns to the state before adjustment if the power is turned
off.
To execute the menu
(1) Turn the search dial and move the * mark on the
superimpose picture as described below.
To save the adjustment data after adjustment
8 "SAVE ALL ADJUST DATA"
To return to the adjustment data before adjustment
8 "ALL DATA PREVIOUS"
. In a time data display area, "SAVE ALL ADJUST
DATA" and "ALL DATA PREVIOUS" are dis-
played as messages "SAVE ALL ADJUST" and
"ALL DATA PREVIOUS", respectively.
(2) Press the SET button.
. The data transmission is initiated when the SET
button is pressed.
. Message "Saving..." or "Loading..." is displayed on
the superimpose picture, and message "SAVING" or
"LOADING" is displayed in the time data display
area.
(3) Confirm that the data transmission is completed.
. After data transmission is completed, message "Save
Complete" or "Load Complete" is displayed on the
superimpose picture, and message "SAVE COM-
PLETE" or "LOAD COMPLETE" is displayed in
the time data display area.
(4) Press the MENU button to terminate the menu.
4-70
Example of display and operation
(In data save)
Superimpose picture
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
*
NO OPERATION
SAVE ALL ADJUST DATA
ALL DATA PREVIOUS
(1) 0
DIAL (2)
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
NO OPERATION
*
SAVE ALL ADJUST DATA
ALL DATA PREVIOUS
(2) 0 [SET]
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
Saving ...
0
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
Save Complete
(3)
0
Confirm
[MENU]
(4)
0
Time data display area
NO OPERA
TION
SAVE ALL
ADJUST
SAVING
SAVE CO
MPLETE
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Advertisement
Table of Contents
