Display Mode - Sony Betacam SX DNW-A100 Maintenance Manual

4-4-2. Display Mode

The operation in the ordinary display mode is described
based on a display example on the superimpose picture.
The log number/total log count is displayed in the second
line. "(001/000)" is displayed when no log exists.
The third to tenth lines (eight lines) are the area where logs
are displayed. The three-digit number on the left indicates
the log number. The contents of a log are displayed on its
right.
A calendar/clock is displayed on the lowest line.
m
. The top screen on the right is the example displayed
when the error logger mode is first activated after the
power is turned on. The second-time or later screen is
displayed with the preceding display completed.
. In a time data display area, only the log number/total log
count (e.g., "ERR LOG 001/003") is displayed.
Search dial (JOG mode)
To display the log number not displayed on the screen, turn
the search dial and move the * mark.
CTL/TC/UB button
On this screen, the whole message is displayed partially.
To display other information (date and time code), press
the CTL/TC/UB button.
F FWD button
The whole contents of a log to which the * mark was set
are displayed while the F FWD button is pressed.
The category (error code for TAPE ERROR and DISK
ERROR) of an error log is displayed in the third line.
Messages are displayed in the fourth and fifth line
s, and sub-error messages in the sixth to eighth lines. The
date (not including the year) is displayed in the ninth line,
and time code in the tenth line.
Other logs can be displayed in this display state when the
search dial is turned with the F FWD button pressed.
RESET button
The recorded all logs are erased when the RESET button is
pressed.
n
Usually, do not erase any log.
There may be some error logs that are useful for confirma-
tion of the progress when a trouble occurs or that are
important in preventing a trouble from occurrence.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Example of display and operation
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'96 07 03 09:23:00
0 DIAL (2)
ERROR LOGGER
(002/003)
001 REEL TROUBLE-1
*
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
0 [CTL/TC/UB]
ERROR LOGGER
(002/003)
001 01/01 13:12:56 REEL
*
002 03/03 15:34:12 TAPE
003 05/05 17:56:34 INTE
0 [CTL/TC/UB]
ERROR LOGGER
(002/003)
001 00:01:02:03 REEL TR
*
002 01:02:03:04 TAPE TE
003 20:10:00:20 INTERNA
[F|FWD]
0
ERROR LOGGER
(002/003)
ERROR-06
TAPE TENSION ERROR
DATE : 03/03 15:34:12
TC : 01:02:03:04
'96 07 03 09:23:20
[F|FWD] + DIAL (2)
0
ERROR LOGGER
(003/003)
ERROR-92
INTERNAL INTERFACE
ERROR
DATE : 05/05 17:56:34
TC : 20:10:00:20
'96 07 03 09:23:25
0
ERROR LOGGER
(003/003)
001 00:01:02:03 REEL TR
002 01:02:03:04 TAPE TE
*
003 20:10:00:20 INTERNA
0 [RESET]
ERROR LOGGER
(001/000)
*
'96 07 03 09:23:30
4-4. Error Logger Display Mode (M2)
4-4-2. Display Mode
4-85