Electrical Adjustments - Sony Betacam SX DNW-A100 Maintenance Manual

6-2-2. Electrical Adjustments

Adjustment Items
No. Item
0 Preparation
1 Unity level adjustment
2 Offset level adjustment
3 LAU PB frequency response adjustment
(OXIDE)
(Audio head dumping adjustment)
4 LAU PB frequency response adjustment
(METAL) (DNW-A100P/A50P/A45P only)
5 LAU Dolby level adjustment
6 LAU PB level adjustment
7 LAU PB phase adjustment
Dolby is registered trademark of Dolby Laboratories Licensing Corporation.
n
When AES/EBU I/F kit BKNW-105 is equipped in the DNW:
. Adjustment of No. 1 is not needed.
. Substitute MONITOR OUTPUT L/R connectors for AUDIO OUTPUT CH1/CH2 connectors respec-
tively.
(Because AUDIO OUTPUT CH1/CH2 connectors are not longer available after installing BKNW-105.)
0. Preparation
Setting of the DIP switch (DNW-A100P/A50P/A45P only)
(1) Set S1100-1 on SS-63 board to ON to treat the extended menu of the setup menu.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Adjustment point
CH1 1RV101/APR-12(A-3)
CH2 1RV201/APR-12(E-3)
CH1 1RV103/APR-12(D-2)
CH2 1RV203/APR-12(G-2)
CH1 1RV501/APR-12(A-1)
1RV500/APR-12(A-1)
[S500/APR-12(A-1)]
CH2 1RV601/APR-12(G-1)
1RV600/APR-12(G-1)
[S600/APR-12(G-1)]
CH1 1RV502/APR-12(A-1)
CH2 1RV602/APR-12(G-1)
CH1 1RV503/APR-12(C-1)
CH2 1RV604/APR-12(E-1)
CH1 1RV504/APR-12(B-1)
CH2 1RV605/APR-12(F-1)
1RV603/APR-12(F-1)
SS-63 board
S1100 on SS-63 Board
Notes
AUDIO OUTPUT CH1
AUDIO OUTPUT CH2
TP700/APR-12(G-3)
TP700/APR-12(G-3)
AUDIO OUTPUT CH1
AUDIO OUTPUT CH2
AUDIO OUTPUT CH1
AUDIO OUTPUT CH2
TP501/APR-12(C-1)
TP601/APR-12(E-1)
AUDIO OUTPUT CH1
AUDIO OUTPUT CH2
AUDIO OUTPUT CH1/CH2
S1100
ON
OFF
Set S1100-1 to ON
6-2. APR-12 Board Replacement
6-11