Sony Betacam SX DNW-A100 Maintenance Manual page 145

A1 : RF ADJUST
This submode is used to adjust the RF system.
For more details, refer to Section 4-2-8 (on page 4-51).
RF ADJUST MODE
*
A10:EQUALIZER (1/2)
A11:EQUALIZER (2/2)
A12:REC CURRENT
A13:PLAY PLL
A14:FWD PLL
A15:REV PLL
A16:A/D GAIN
A17:A10-A16 ALL ADJUST
A1F:NV-RAM CONTROL
For DNW-A100/A100P
Title
A10 : EQUALIZER (1/2)
A11 : EQUALIZER (2/2)
A11 : EQUALIZER
A12 : REC CURRENT
A13 : PLAY PLL
A14 : FWD PLL
A15 : REV PLL
A16 : A/D GAIN
A17 : A10-A16 ALL ADJUST
A17 : A11-A16 ALL ADJUST
A1F : NV-RAM CONTROL
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
http://getMANUAL.com
RF ADJUST MODE
*
A11:EQUALIZER
A12:REC CURRENT
A13:PLAY PLL
A14:FWD PLL
A15:REV PLL
A16:A/D GAIN
A17:A11-A16 ALL ADJUST
A1F:NV-RAM CONTROL
For DNW-A50/A45/A50P/A45P
Page Description
4-51 Automatically adjusts the PB head playing back level and PB equalizer
(for A1, A3, A5, A7, B1, B3, B5, and B7 channels).
(Used exclusively for DNW-A100/A100P.)
4-51 Automatically adjusts the PB head playing back level and PB equalizer
(for A2, A4, A6, A8, B2, B4, B6, and B8 channels).
4-51 Automatically adjusts the recording current.
4-51 Automatically adjusts the PB PLL circuit (in the PLAY mode).
4-51 Automatically adjusts the PB PLL circuit (in the FORWARD mode).
4-51 Automatically adjusts the PB PLL circuit (in the REVERSE mode).
4-51 Automatically adjusts the gain when a PB RF signal is converted from
analog to digital.
4-56 Continuously executes the above automatic adjustment menus A10
(A11) to A16.
4-58 Saves the adjustment data in an RF system.
4-2. TAPE Maintenance Mode (M0)
4-2-1. Overviews
4-11