Generator Assembly Removal - Yamaha EF3000iSE Service Manual

GENERATOR

GENERATOR ASSEMBLY REMOVAL

CAUTION:
The magnetic force of the magneto rotor is
very strong. Therefore, be sure to remove
the magneto rotor and stator coil assembly
together as a set, otherwise they may be
damaged.
1. Remove:
• Magneto rotor nut 1
NOTE:
Attach the sheave holder 2 to hold the mag-
neto rotor.
Sheave holder:
Rotor assembly holder:
SWL3240J
2. Remove:
• Stator coil assembly bolts 1
NOTE:
Turn the magneto rotor until the stator coil
assembly bolts are visible through the holes in
the rotor, and then remove the bolts.
SWL3250J
3. Remove:
• Stator coil assembly bolts 2
• Tubes
NOTE:
Turn the magneto rotor until the stator coil
assembly bolts are visible through the holes in
the rotor, and then remove the bolts.
SWL3260J
3-22
ENG
YS-01880-A, 90890-01701
(commercially available)