Appendix 3. Terminology - Hitachi CHROMASTER 5160 Instruction Manual

APPENDIX 3. TERMINOLOGY

Initialize.......................................... The instrument is initialized.
Initial screen .................................. Appears upon completion of initialization after turning on
Injection ......................................... Injection of sample.
Warming-up ................................... Warms up the instrument. Stable analysis requires
Error message ............................... Statement which is displayed in the event of an anomaly
Calibration ..................................... An operation for preparing the baseline for calculating the
Pause (PAUSE)............................. A series of analysis of a sample is suspended and an
Start ............................................... A series of analysis is started.
Stop time ....................................... Time set which is required for analyzing a sample and
Septum .......................................... Sheet used as the lid for a vial.
Loop injection method ................... A sample injection method in which a sample is, once
Degassing...................................... Degassing of mobile phase as well as of detergent.
Table.............................................. Screen for setting up the analytical conditions for each
Pattern ........................................... A sequence in which the sample on the code rack is
Utility.............................................. A function for setting instrument operating conditions.
the power supply.
enough warm air.
in the instrument.
concentration of a sample.
interrupt analysis is performed.
obtaining chromatogram. After a lapse of such time, a
series of analysis for the next sample is started.
after stored in a loop temporarily, introduced into the
analysis channel.
setting screen sample.
analyzed.
APPENDIX 3 - 1