Output Terminals - Panasonic MICRO-IMAGECHECKER PV310 Use Manual

3.1.5 Output Terminals

Arrangement of the terminals
Output Circuit:
Product number with final number "N"
The NPN open collector output is adopted. The load current should be within the rated voltage range.
Rated operating voltage: 12 to 24 V DC
32
Signal Name Content
COM COMMON For FLASH only
FLA FLASH Flash sync signal
COM COMMON Common terminal for General Output
RDY READY Ready signal
ERR ERROR Error signal (refer to page 316 for
more details of error causes.)
REN READ END Image capture completion signal
STR STROB Strobe signal (Data output completion
signal during handshake )
OVF OVER FLOW Overflow signal (this signal is output if
FLAG the output value exceeds the data
length you have set)
D1 Data Data output signals
D2 Data2
•
D3 Data3 •
D4 Data4
•
D5 Data5 •
D6 Data6
D7 Data7
D8 Data8
A connecting example with PLC
Number of scans
Data of Judgment
Data of Numeric Calculation
Data of Statistics