Table of Contents
Advertisement
Checking the Results
You can view the test results obtained by executing Smart Matching checker under the Result tab.
1.
Highlight the Result tab.
2.
Press the A key and begin a test.
Up to eight x/y coordinates and differential values of the objects from the 1st to 64th can be viewed per
screen. The image area of the highlighted object number is displayed in red, so that you can easily check
the data on the monitor screen.
When you check the data after (or before) the 9th, choose the 8th number and tilt the ENTER key
downward (or choose the 1st number and tilt the ENTER key upward).
Max. Subtraction:
In the Max. Subtraction column, the area value of
the biggest cluster among the detected pixel
clusters is displayed.
Correlation Value:
The correlation value detected at the last phase of
the sequence. But, if you set "Object" to "Low
Contrast", the value different from the correlation
value of the part detected at the last phase of the
sequence is displayed. Refer to page 120.
•
Up to 128 subtraction clusters can be detected. If the number of subtractions exceeds 128, the result of
subtraction will automatically be 255 due to occurrence of subtraction count error.
•
If you test on a checker menu, the operation of the PV310 differs depending on the currently displayed
image.
Display Image
Live
Memory
124
Operation of PV310
Tests after capturing a new image
Tests using a memory image that is currently displayed without
capturing a new image
Advertisement
Table of Contents
