Table of Contents
Advertisement
1.2.6 Camera Switching Unit: ANPV3700
No
Name
Input port for
1
Camera A
Input port for
2
Camera B
3
OUT (image output)
port
4
DIN rail attachment
lever (one-two hook)
5
Camera A/Camera
B indicators
6
Dip switches
(4 switches)
7
Input terminal for
external signal
* A Double speed random camera: ANM831 and an Ultra small camera: ANPVCA1012 are not available in Camera
division mode.
For more information on the camera control unit, refer to Chapter 16 Camera Switching Unit (page 321).
Description
Connects a camera. Camera A is connected to this port.
Connects a camera. Camera B is connected to this port.
Outputs images to the PV310. Use the provided cable for switching cameras.
To attach to DIN rail with a single touch.
The indicators tell which camera is in use for capturing images.
Lighting
Status
Lamp
A only
The PV310 is in camera switching mode (the dip switch 2 is placed in
the NORMAL position). The image captured by Camera A is output.
B only
The PV310 is in camera switching mode (the dip switch 2 is placed in
the NORMAL position.) The image captured by Camera B is output.
A and B
The PV310 is in DIV mode (the dip switch 2 is placed in the DIV
position).
The four dip switches change the functions shown in the table below.
If you want to switch between Camera A and Camera B using an
LOCAL /
external device when the PV310 is in camera switching mode
1
REMOTE
(the dip switch 2 is placed in the NORMAL position), set to
"REMOTE".
If you want to switch between Camera A and Camera B (in
camera switching mode), set to "NORMAL". If you want to
NORMAL
2
combine the upper and lower half parts of two images captured
/ DIV*
by Camera A and Camera B in one image (in the DIV mode), set
to "DIV".
This is a switch for changing the cameras to output the images in
3 A / B
camera switching mode (the dip switch 1 and 2 are placed in
LOCAL and NORMAL positions respectively).
Upper /
In camera division mode (the dip switch 2 is placed in the DIV
4
Lower
position), select a part of the images captured by Camera A and
division
Camera B that you want, upper half or lower half.
This is a terminal for inputting a camera switch signal.
11
Advertisement
Table of Contents
