Table of Contents
Advertisement
8.5.1 Selecting an Display Image
There are three types available for displaying images.
No.
Settings
1
To select a memory image to display
Memory 1 (C1), Memory 2 (C2), Memory 1+2
2
To select live image or memory image
(A live image is a current image. The image changes in real time. For
example, if you covered the lens surface with your hands, a blacken
image is captured.)
3
To select gray image or binary image (groups A through H)
Only the last saved image can be also displayed when inspection is executed. Refer to page 229 for details.
Switching the Display Camera Image
1.
Select "TOOL" > "RUN Mode Image Settings".
2.
Select "Display Camera Image".
The Display Camera Image menu is displayed.
Option
Live – C1
Live – C2
Live-C1+C2
Memory-C1
Memory-C2
Memory-C1+C2
3.
Move the cursor to the image to be changed and press the ENTER key.
•
When you display a live image, it takes longer time to capture an image. It is advisable to display the
memory image(s) of Memory 1 and/or Memory2 when you executing inspection.
•
When inspection is executed using the image save function while the last saved image is displayed," select
Memory-C1 or Memory-C2.
206
Image to be displayed
Live image of Camera 1 (real-time image)
Live image of Camera 2 (real-time image)
Live image of Camera 1 and Camera 2 (real-time image)
Memory image of Camera 1(still image for inspection)
Memory image of Camera 2 (still image for inspection)
Camera 1 and Camera 2 (still image for inspection
execution)
Setting Item
Display Camera Image
Display Gray Value/Binary
Advertisement
Table of Contents
