What To Do If You Faced A Trouble - Panasonic MICRO-IMAGECHECKER PV310 Use Manual

6.22.3 What To Do If You Faced a Trouble

Judgment result is always NG.
This is attributed to the following causes.
An object could not be detected.
Recheck and reconsider the area size and the sequence setting values.
No base position is saved.
The error code "E0049" may be displayed. Since any base position is not saved, the PV310 cannot work
properly. Note that if you do the followings after saving it, you need to save the base position again.
Position Adjustment checker that refers to adjustment amount cannot detect the object.
If Position Adjustment is saved as any number except "0", the adjustment amount of Position Adjustment
or Rotation Adjustment that is saved as the number is referred. If the Position Adjustment or Rotation
Adjustment checker failed to refer to the adjustment amount, it cannot detect the object. The PV310 does
not function properly and outputs "NG" result.
164