Camera Control Configuration - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Central Devices
C
4<
C
C I
I
DCN-SW
DCN-CCU
C
+
figure 10. 1 1: Mix-minus
Note
When the distance between the two systems is
great, you can use a telephone coupler to
connect the two systems.
Bosch Security Systems | 2007-02 | 9922 141 70525
+
Legend
C Contribution devices
I Interpretation devices
Optical network
+
Chime
10.8.3 Attention chimes
This information is the same for the network controller
and the CCU (refer to section 8.8.3).
3
10.8.4 Erase requests-to-speak and
speakers
This information is the same for the network controller
and the CCU (refer to section 8.8.4).
4
10.8.5 Floor distribution
This information is the same for the network controller
4
and the CCU (refer to section 8.8.5).
2
10.8.6 Intercom
This information is the same for the network controller
1
and the CCU (refer to section 8.8.6).
10.9

Camera control configuration

3
10.9.1 Introduction
The network controller can automatically point video
cameras in the direction of the delegate or chairman
that speaks.
You can connect camera(s) as follows:
• Direct camera control in a system without a PC.
• Camera control through a video switcher in a system
without a PC.
• Direct camera control in a system with a PC.
• Camera control through a video switcher in a system
with a PC.
en | 87