Bosch DCN Next Generation Installation & User's Instructions page 68

DCN Next Generation | Installation and User Instructions | Central Devices
8.10.7 Treble
Use the 3 Treble menu to set the level of the treble of
the loudspeakers of the contribution devices (refer to
table 8.27).
table 8.27: Treble sub-menu (* = default)
Menu item
3 Treble
8.10.8 Fault Status
Use the 4 Fault Status menu item to see the condition
messages of the central control unit.
table 8.28: Messages (low to high importance)
Messages
No Fault
No NCO
8.10.9 Monitoring
Use the 5 Monitoring menu item to open the Monitoring
sub-menu (refer to table 8.29).
table 8.29: Monitoring sub-menu (* = default)
Menu item
5 Monitoring
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
---
Description
The central control unit operates correctly.
The central control unit is in multi-mode and the network controller is not available in
the network.
Parameter
Signal:
Floor*
Input 1
Input 2
Output 1
Output 2
Value
-12 to 12 dB (0 dB*)
Value
Volume level:
-31 to 0 dB (-16 dB*)
-31 to 0 dB (-16 dB*)
-31 to 0 dB (-16 dB*)
-31 to 0 dB (-16 dB*)
-31 to 0 dB (-16 dB*)
en | 68
Description
The level of the treble
output.
Description
The signal that is available
on the headphones
socket of the central
control unit and its volume
level.