Bosch DCN Next Generation Installation & User's Instructions page 125

DCN Next Generation | Installation and User Instructions | Central Devices
13.5.2 Navigation and operation
Refer to section 8.10.2 for information about the
navigation and operation of the configuration menu of
the cobranet interface. The navigation and operation of
the configuration menu of the cobranet interface is the
same as for the central control unit.
13.5.3 Main
When you start the cobranet interface, the display first
shows Starting. The display then shows the Main menu
item.
Note
If you do not turn or push the knob for three
minutes, the display automatically goes back to
the Main menu item. The display does not
automatically go back to the Main menu item
from the 2 Monitoring menu item and its
sub-menus.
The Main menu item contains:
• The name of the cobranet interface. The default
name is CobraNet. You can change the name with
the 4B Unit Name menu item (refer to section
13.5.8).
• Eight VU meters that show the volume levels of the
audio inputs and audio outputs of the cobranet
interface (refer to section 8.10.2.5). When an control
input is disabled, an X character replaces the VU
meter of the corresponding audio input or audio
output on the display.
Bosch Security Systems | 2007-02 | 9922 141 70525
en | 125