DCN Next Generation | Installation and User Instructions | Installation Devices
Tool kit supplier:
Rennsteig Werkzeuge GmbH
Viernau, Thüringen, Germany
Supplier type number: 600 100 PHI
Note
Before you use the POF cutter/stripping tool
(tool 6), remove the blocking screw with the Torx
screwdriver (tool 7).
Note
After 1,260 cuts, the POF cutter/stripping tool
(tool 6) blocks automatically. In that case,
replace the cutting system with the spare
cutting system (tool 1) to ensure smooth cuts.
Additional spare cutting systems are available
as type number LBB4418/50.
Caution
Apply a film of oil to all tools regularly to stop
rust.
Bosch Security Systems | 2007-02 | 9922 141 70525
en | 242