Bosch DCN Next Generation Installation & User's Instructions page 106

DCN Next Generation | Installation and User Instructions | Central Devices
11.5.8 Setup
Use the 4 Setup menu item to open the Setup
sub-menu. Use the menu items in this sub-menu to
configure the audio expander (refer to table 11.17).
Note
To open the Setup sub-menu, you must
push and hold the knob for more than 3
seconds.
table 11. 1 7: Setup sub-menu (* = default)
Menu item
4A Input Mode
4B AGC
4C Level
4D Routing
4E Unit Name
4F Defaults
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
---
Input:
Input 1
Input 2
Input 3
Input 4
Signal:
Input 1
Input 2
Input 3
Input 4
Output 1
Output 2
Output 3
Output 4
Signal:
Input 1
Input 2
Input 3
Input 4
Output 1
Output 2
Output 3
Output 4
---
---
Value
---
AGC:
On, Off
On, Off
On, Off
On, Off
Level:
-6 to 6 dB (0 dB*)
-6 to 6 dB (0 dB*)
-6 to 6 dB (0 dB*)
-6 to 6 dB (0 dB*)
-24 to 6 dB (0 dB*)
-24 to 6 dB (0 dB*)
-24 to 6 dB (0 dB*)
-24 to 6 dB (0 dB*)
Channel:
--, 00 to 31
--, 00 to 31
--, 00 to 31
--, 00 to 31
--, PA, 00 to 31
--, PA, 00 to 31
--, PA, 00 to 31
--, PA, 00 to 31
Name:
Analog Expander*
Custom name
---
en | 106
Description
Gives access to the Input
Mode sub-menu (refer to
section 11.5.9).
Sets the automatic gain
control (AGC) of the
audio inputs on and off
(refer to section 11.5. 1 0).
The levels of the audio
inputs and the audio
outputs of audio
expander.
The channel that is
attached to the audio
input or audio output of
the audio expander. (PA =
public address system.)
The name of the audio
expander (max. 16
characters).
Opens the Reset menu
item (refer to section
11.5. 1 1).