Dcn-Idcrd Chip Cards - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Peripheral Devices
49

DCN-IDCRD Chip Cards

With the DCN-IDCRD Chip Cards delegates and
chairmen can identify themselves to the system. You
can use the chip cards to give the delegates and
chairmen access to:
• The microphones of the contribution devices.
• The voting functions on the contribution devices.
• The intercom functions on the contribution devices.
Note
To configure the chip cards, you must use the
LBB4157/00 Chip Card Encoder (refer to
chapter 48).
figure 49. 1 : Chip card
Bosch Security Systems | 2007-02 | 9922 141 70525
Refer to table 49.1 for the characteristics of the DCN-
IDCRD Chip Cards.
table 49. 1 : Card characteristics
Number of cards:
100
Label area:
72 x 24 mm
Memory:
4096 bits (512 bytes)
Dimensions (h x w x d):
54 x 85.7 x 0.76 mm (conform ISO 7816 1-2)
Note
You can put labels that are larger than
72 x 24 mm on the rear of the chip card.
Note
Refer to the Delegate Database Software User
Manual for instructions that tell you where to find
the code of the card in the chip.
en | 270