DCN Next Generation | Installation and User Instructions | Contribution Devices
14.6
External connections
14.6.1 DCN
Connect the discussion unit to the DCN with the DCN
cable. You can use the DCN socket to make a
loop-through with the discussion unit.
table 14.5: DCN connections
Number of connections:
1x DCN socket
1x DCN cable (2 m) with plug
Location:
Rear side (default)
Power consumption:
•
DCN-DISL: 2.75 W
•
DCN-DISS: 2.75 W
•
DCN-DISCS: 2.9 W
•
DCN-DISD: 2.8 W
•
DCN-DISDCS: 3. 1 5 W
•
DCN-DISV: 3.05 W
•
DCN-DISVCS: 3.20 W
Note
You can move the DCN cable from the rear side
to the bottom side of the discussion unit (refer
to figure 14. 1 3).
Bosch Security Systems | 2007-02 | 9922 141 70525
You can use the cable-to-unit clamps to lock DCN
cables to discussion units (refer to figure 14.16).
1
2
figure 14. 1 6: Cable-to-unit clamp
en | 147