DCN Next Generation | Installation and User Instructions | Central Devices
8.10.10 Enquiry
Use the 6 Enquiry menu item to open the Enquiry
sub-menu. The menu items in this sub-menu give
general data about the central control unit (refer to table
8.30).
Note
This data must be mentioned in all service
requests and failure reports.
table 8.30: Enquiry sub-menu (* = default)
Menu item
6A Serial Number
6B HW Version
6C FPGA Version
6D SW Version
6E FW Version
8.10.11 Setup
Use the 7 Setup menu item to open the Setup
sub-menu. You can use the menu items in this
sub-menu to configure the central control unit and the
system (refer to table 8.31).
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
---
---
---
---
---
Value (read-only)
e.g. 20.0.0027E
e.g. 02.00
e.g. 01.05
e.g. 02.00.0777
e.g. 3. 1 0. 1 560
en | 69
Description
The hexadecimal serial
number of the central
control unit.
The version number of the
hardware of the central
control unit.
The version number of the
FPGA firmware of the
central control unit.
The version number of the
software of the central
control unit.
The version number of the
firmware of the central
control unit.