DCN Next Generation | Installation and User Instructions | Central Devices
10
DCN-NCO Network
Controller
10. 1
Introduction
The DCN-NCO network controller controls a multi
DCN-CCU system. The network controller can operate
with or without a control PC.
Note
The network controller and all CCUs in a multi
CCU system must be switched on in order to
work correctly, even if the CCUs are set to
single mode.
Note
Transmitters, CCUs and network controllers
must be connected to an optical network in the
power off state.
Bosch Security Systems | 2007-02 | 9922 141 70525
en | 76