Bosch DCN Next Generation Installation & User's Instructions page 249

DCN Next Generation | Installation and User Instructions | Installation Devices
45.4.8 Attach the ferrules
Do as follows:
20 Put a ferrule into the spring-loaded stop of the POF
positioning/crimping tool (tool 4, refer to figure
45.21).
figure 45.21: Inserting a ferrule
21 Turn the small lever to lock the ferrule (refer to
figure 45.22).
figure 45.22: Locking a ferrule
Bosch Security Systems | 2007-02 | 9922 141 70525
22 Put one plastic optical fiber into the ferrule in the
spring-loaded stop of the POF positioning tool (refer
to figure 45.23).
figure 45.23: Crimping ferrules (1)
23 Close and open the tool to crimp the ferrule onto the
core of the fiber.
24 Repeat steps 20 to 23 for the other fiber in the cable.
The ferrules only have been crimped on the core of
the optical plastic fiber. The next step crimps the
ferrules on the sheaths of the fibers.
25 Put both ferrules in the crimping tool (tool 3, refer to
figure 45.24).
figure 45.24: Crimping ferrules (2)
en | 249