Reset And Initialization (Initialize Menu) - Sony DVS-9000 User Manual

1
After selecting the devices the settings apply to, in the System>Start Up
menu, press [Initial Status Define].
A confirmation message appears.
2
Press [Yes].
This saves the initial status settings other than the "setup" settings for the
selected devices in non-volatile memory within the respective devices.

Reset and Initialization (Initialize Menu)

To carry out a reset or memory initialization for a device, use the
System>Initialize menu.
To display the Initialize menu
In the Engineering Setup menu, select VF1 'System' and HF5 'Initialize.'
The status area shows the current start-up mode settings.
Resetting the device and initialize memory
Use the following procedure.
1
In the status area of the System>Initialize menu, select the device to which
the settings are to apply.
2
In the <Initialize> group, select one of the following modes.
Reset: Reset the device.
All Clear: Initialize memory.
3
Press [Execute].
A confirmation message appears.
4
Select [Yes].
Depending on the selection in step 2, the following is the result.
• When you selected [Reset], a reset is applied to the device causing it to
be restarted in the start-up state.
• When you selected [All Clear], all memory in the device is cleared,
including snapshots, keyframe effects, setup, and so on, and the device
returns to its factory default settings. However, the Network Config,
Format, Start Up, and Date/Time settings are not initialized.
Setup for the Whole System
81