Sony DVS-9000 User Manual page 39

The status area reflects the selected path type.
At this point, depending on the setting for Curve, the effect for Hue and
Xpt is also affected as shown in the following table. In the menu, the Hue
and Xpt settings do not change, but the path type indication is dimmed out.
Curve setting
OFF
Step
4
If you selected Spline as the path type, set the following parameters, using
the knobs.
Knob
1
2
3
Changing the path type for Hue
1
Press the Hue path type indication for the item that you want to change.
2
Turn knob 1 to change the Hue path type.
The path type indications shown in the menu represent the change in hue
as seen on a Vectorscope.
Changing the path type for Xpt
1
Press the Xpt path type indication for the item that you want to change.
A path selection window appears.
Hue change
Does not change
Changes as with the Step setting
Parameter Adjustment
Tens Spline interpolation tension
Bias Spline interpolation bias
Cont Spline interpolation continuity
CW: Rotate clockwise.
CCW: Rotate counterclockwise.
Short: The hue changes in whichever of the clockwise and
counterclockwise directions is shorter.
Long: The hue changes in whichever of the clockwise and
counterclockwise directions is longer.
Xpt change
Hold
Is not affected
Setting values
–4.00 to +4.00
–4.00 to +4.00
–4.00 to +4.00
39
Path Setting