Snapshot Operations In The Menus; Setting Snapshot Attributes - Sony DVS-9000 User Manual

Snapshot Operations in the Menus

You can also set snapshot or key snapshot attributes in the Snapshot menu,
which also displays the status of the registers. To access the Snapshot menu,
press the top menu selection button [SNAPSHOT] in the menu control block.
In the Snapshot menu, as well as setting snapshot attributes, you can carry out
editing operations on snapshots, including copy and delete.
See "Snapshot Register Editing" (page 58).

Setting Snapshot Attributes

Applying snapshot attributes
To apply an attribute to a snapshot, use the following procedure.
1
In the Snapshot menu, press VF2 'Snapshot' and HF1 'Attribute.'
The Snapshot>Attribute menu appears.
The status area shows the region names, register numbers, and the status
and attributes set.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window.
The selected region name appears in the upper part of the list.
3
To select the desired register, press the register number or register name in
the status area, or turn knob 1.
Knob
1
4
In the <Attribute> group, press the buttons for the attributes you want to
apply, turning them on.
Carry out the following procedures for each of the attributes.
Parameter Adjustment
Register Register number
Setting values
1 to 99

Snapshot Operations in the Menus

55