Signal Output Settings (Output Menu) - Sony DVS-9000 User Manual

6
Press [Video Process], turning it on.
7
Adjust the following parameters.
Knob
1
2
3
4
5
To set the parameter settings to their defaults, press [Unity].
Enabling the illegal color limiter
To enable the illegal color limiter for the signals generated by the switcher
internal matte generator, press [Matte Illeg Col Limit] in the Switcher>Input
menu, turning it on.

Signal Output Settings (Output Menu)

For setup relating to signal outputs, use the Switcher>Output menu.
To display the Output menu
In the Engineering Setup menu, select VF3 'Switcher' and HF3 'Output.'
The status area shows the signal numbers and names, and output signal phase
for the signals output from Output 1 to 48.
Assigning output signals
To assign a signal to output from an output port, use the following procedure.
1
In the Switcher>Output menu, press [Output Assign].
The Output Assign menu appears.
The status area shows the output ports and assigned signals on the left, and
a list of signals that can be assigned on the right.
2
In the <Output Assign> group, select any of the following.
[Re-Entry Source]: It is possible to make duplicate assignments.
M/E-1 Output 1 to 6
M/E-2 Output 1 to 6
M/E-3 Output 1 to 6
Parameter Adjustment
Video Gain Video signal gain
Y Gain Y signal gain
C Gain Chrominance signal gain
Hue Delay Hue delay
Black Level Black level
Setting values
−200.00 to +200.00
−200.00 to +200.00
−200.00 to +200.00
−180.00 to +180.00
−7.30 to +109.58
Setup Relating to Switcher Processor
107