Setting Key Snapshot Attributes; Snapshot Register Editing - Sony DVS-9000 User Manual

When a GPI output is set:
Displayed
character codes
Port number

Setting Key Snapshot Attributes

Applying key snapshot attributes
To apply an attribute to a key snapshot, use the following procedure.
1
2
3
4

Snapshot Register Editing

You can carry out the following editing on snapshot registers.
(You can use similar procedures also on wipe snapshot, DME wipe snapshot
and key snapshot registers.)
• Lock: Write-protect the contents of the register.
58
Snapshot Operations in the Menus
Attributes set
GPI output is set for the port of the displayed number.
In the Snapshot menu, press VF5 'Key Snapshot' and HF1 'Attribute.'
The Snapshot>Key Snapshot>Attribute menu appears.
The status area shows the region names, register numbers, and whether the
registers are locked or not.
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window.
The selected region name appears in the upper part of the list.
To select the desired register, press on the register number or register name
in the status area, or use knob 1.
Knob Parameter
1 Register
In the <Recall Mode> group, select one of the following modes for save
and recall operations.
XPT: Only the key material selection data is saved or recalled.
Modifier: Only the key modifier settings are saved or recalled.
Transition: Only the independent key transition settings are saved or
recalled.
Adjustment
Register number
Setting values
1 to 99