Sony DVS-9000 User Manual page 86

3
Assigning the key delegation in the downstream key control
block (MKS-8032 DSK Fader Module)
As an example, to assign key 4 of the M/E-1 bank to key delegation button 1
of the downstream key control block 1 (MKS-8032), use the following
procedure.
1
2
3
4
5
86
Setup Relating to Operations From the Control Panel
For the selected Bank number, in the <M/E Operation> group, select one
of the following.
Enable: Enable panel display and operation of the operating bank.
Disable: Enable only panel display, and disable operation of the operating
bank.
Inhibit: Disable both the panel display and operation of the operating
bank.
In the Panel>Config menu, press the [DSK Fader Assign].
The DSK Fader Assign menu appears.
Directly press on the indications in the status area, to select the
downstream key control block for which you want to make the setting, and
select the key delegation.
Here, set both Module and Key to 1 as examples.
In the <M/E Select> group, select the operating bank of the key you want
to assign.
Here, select [M/E-1] as an example.
In the <Key Select> group, select the key you want to assign.
Here, select [Key4] as an example.
To disable the fader lever of the selected downstream key control block,
select [Disable] in the <Fader Assign> group.
To enable the fader lever, select one of the following in the <Fader
Assign> group, determing the key to which the fader lever operation
applies.
All : Key selected with one of the key delegation buttons
Key1: Key assigned to key delegation button 1 ([DSK1] button)
Key2: Key assigned to key delegation button 2 ([DSK2] button)
Key3: Key assigned to key delegation button 3 ([DSK3] button)
Key4: Key assigned to key delegation button 4 ([DSK4] button)