Setup Relating To Operations From The Control Panel; Overall Control Panel Settings (Config Menu) - Sony DVS-9000 User Manual

Setup Relating to Operations From the
Control Panel

Overall Control Panel Settings (Config Menu)

To carry out the overall control panel settings, use the Panel>Config menu.
To display the Config menu
In the Engineering Setup menu, select VF2 'Panel' and HF1 'Config.'
The status area shows the "Bank numbers 1 to 4" (physical locations) of the
operating banks, the allocated operating bank names, and whether or not
operation is enabled.
Interchanging the operating bank order or disable operation
Use the following procedure.
1
In the Panel>Config menu, select the Bank you want to set, using either of
the following methods.
• Press directly on the status area display.
• Press the arrow keys to scroll the reverse video cursor.
• Turn knob 1 to make the setting.
Knob
1
The Bank selection here indicates the physical position on the control
panel, numbering from the top as the 1st Row, 2nd Row, 3rd Row, and 4th
Row.
In the MKS-9011 1 M/E Control Panel, only the 1st Row is available. In
the MKS-9012 2 M/E Control Panel, the 1st and 2nd Rows are available.
2
Select the operating bank that you want to assign to the selected Bank
number in the <M/E Assign> group.
The status area shows the interchanged state of the operating banks.
Note
It is not possible to assign the same M/E logical bank to more than one
physical bank. Be sure to make different M/E assignments.
Parameter Adjustment
Bank Select the position of the operating bank
you want to set

Setup Relating to Operations From the Control Panel

Setting values
1 to 4
85