Screen Saver And Other Settings (Maintenance Menu); Adjusting The Brightness - Sony DVS-9000 User Manual

everything here is set to OFF, then pressing the [ALL] button does not
change the specification of the next transition.
Interchanging the [AUTO TRANS] and [CUT] buttons: To
interchange the [AUTO TRANS] and [CUT] buttons in the transition
control block, press the [Auto Trans/Cut Swap] button, turning it on.
Transition preview operation mode: For the operation mode of the
[TRANS PVW] button, select [Lock] or [Hold] in the <Trans Pvw>
group. The setting as to whether to use the "One-time mode" in which
the transition preview terminates when the transition completes, or to
use button control, is made on the switcher side (see page 111).
Main split fader specification
In the <Main Split Fader> group of the Panel>Operation menu, select
[Left] or [Right].

Screen Saver and Other Settings (Maintenance Menu)

To make settings relating to the screen saver, etc., use the Panel>Maintenance
menu.
To display the Maintenance menu
In the Engineering Setup menu, select VF2 'Panel' and HF7 'Maintenance.'
The status area shows a list of the items with their settings.
Screen saver settings
To enable the menu screen saver, use the following procedure.
1
In the Panel>Maintenance menu, press [Screen Saver], turning it on.
2
Adjust the following parameter.
Knob
1

Adjusting the brightness

You can adjust each of the following brightnesses independently.
LED: Adjust the brightness of the LED displays in the numeric keypad control
block and so forth.
Switch: Adjust the brightness of the panel switches.
Parameter Adjustment
Sleep Time Time until screen saver starts
operation
Setup Relating to Operations From the Control Panel
Setting values
1 to 30 (minutes)
101